|
AMSOIL By-Pass Filter Installations
Submitted by AMSOIL Dealers
|
|
|
|
|
|
|
1997
Chevrolet C-2500 Van
5.7 L Engine
AMSOIL BMK-13 By-Pass filters
mounted directly to body box section, near gas fill, with
self tapping screws. Required 90 degree fittings and extra
hose.
|
|
|
|
|
|
|
|
|
|
2001
Dodge/Cummins
Feeds the AMSOIL BMK-11 from
an existing port on the OEM oil filter mount, and returns
the oil to the "Oil Fill" cap using the AMSOIL BP-89
"swivel" fitting. Mounted the BMK-11 on the passenger
side battery using a simple piece of 2x4" spacer material.
|
1999 Dodge Cummins
Diesel Pickup 4X4
The mounting location is on the cross member
under the radiator at the right side of the vehicle. The owner
wanted to mount the filters as high as possible because he
does some off roading and was afraid of a stick or rock hitting
them.
|
|
|
|
|
|
1997
Chevrolet 2500 4x4
Engine - 454 cu in.
Very simple installation! Everything was in the
BMK-13 kit that was required and only had to move one bracket.
There is plenty of room on the left front inner frame directly
under the drivers seat and the unit is well protected for off
road use.
|
2001
Dodge Ram 2500 5.9L HO Cummins
Fabricated a bracket to mount the filters on
the right side battery holder. Attached are pictures of the
installation and a drawing of the fabricated mounting plate.
|
1988
Olds Cutlass Cierra
3.8L Engine
The Bypass was installed for a show using
a BE90 & SDF29. The installation was right by the book.
The feed was teed off the oil sending unit and the return
was to the oil fill cap.
|
|
|
|
|
|
|
2002
GMC Envoy
4.2L Gasoline Engine
The dual remote mounting bracket
was welded to the outboard side of the frame on the passenger
side. This location is easy to access, close to the OEM filter
location, and protected from exhaust heat.
|
|
|
Disclaimer:
These installation examples have been submitted by sources independent
of AMSOIL INC. and may not comply with AMSOIL INC. installation
instructions or application recommendations.
|
|
|
